How does an interlinked solid fuel stove work?
A typical ‘interlinked’ system will incorporate the following essentials features (1) a dual coil hot water cylinder and (2) a ‘gravity’ heating circuit to dissipate the heat from the stove to the hot water cylinder. I would recommend that you consult your heating installer to determine if your house is suitable for a solid fuel stove installation.
Can a central heating system be linked to a solid fuel stove?
You must not fully pump a solid fuel heating system. Think about it. If you are using an oil or gas boiler and there is a power cut, not only does the central heating pump stop, but the boiler overheats and goes out. Most systems are “Fail safe”. A solid fuel system will carry on producing hot water as long as there is fuel in the fire to burn.
What happens if I use a gas boiler with a solid fuel stove?
If you are using an oil or gas boiler and there is a power cut, not only does the central heating pump stop, but the boiler overheats and goes out. Most systems are “Fail safe”. A solid fuel system will carry on producing hot water as long as there is fuel in the fire to burn.
👉 For more insights, check out this resource.
Can a oil fired heater be connected to a solid fuel stove?
This unit will allow an oil fired ‘sealed’ heating system (e.g. a system boiler) to be connected to a solid fuel ‘open’ system, unlike the ‘interlink’ arrangement previously detailed, where both units must be on an open system.
👉 Discover more in this in-depth guide.
Can a solid fuel stove be connected to an oil boiler?
However, the stove will remain the main source of heating and the oil boiler is used as backup only, thereby reducing oil consumption. The Eco Connect control unit will allow up to four heating zones and a hot water zone to be connected to its control panel.
A typical ‘interlinked’ system will incorporate the following essentials features (1) a dual coil hot water cylinder and (2) a ‘gravity’ heating circuit to dissipate the heat from the stove to the hot water cylinder. I would recommend that you consult your heating installer to determine if your house is suitable for a solid fuel stove installation.
Which is more energy efficient a solid fuel stove or an open fire?
A boiler model stove is three to four times more energy efficient than an open fire. A solid fuel boiler model stove will provide a complete central heating solution by heating radiators (typically 10 to 12 radiators), hot water and also ample direct radiant heat to the room in which the stove is installed.
How does a solid fuel heating system work?
Most Solid Fuel heating systems work by firstly heating up the water inside the stoves boiler to 65°C and then pumping this hot water through your heating system and radiators. But as that happens, cold water from the radiators is introduced to the bottom of the stove boiler.
